اللغة العربية
Home New Products
  •    
     

     

     

    Specialist in Environmental

    Air Quality Monitoring

  •    
     

     

     

    Better Performance in

    Measurement Solutions

  •    
     

     

     

    Multi Dimensional

    Analytical Solutions

  •    
     

     

     

    Scientific & LAB

    Instrumentation

  •    
     

     

     

    Product for Analytical Science

  •    
     

     

     

    Safe the Environment

   Home » Consumables & Supplies » Articles » Operators: Sources of Error
 
Laboratory News
Drinking Water, from Sunshine
10/18/2016

An MIT team designed solar-powered portable desalination system to use in disaster zones and remote regions
.........Read full story


Squid Provide Insight into Human Hearing
10/18/2016

The ordinary squid, Loligo pealii—best known until now as a kind of floating buffet for just about any fish in the sea—may be on the verge of becoming a scientific superstar, providing clues about the origin and evolution of the sense of hearing
.........Read full story


Chemists Produce Biofuel from Used Cooking Oil
10/18/2016

A team of university chemists have demonstrated that cooking oil can be used and revalued, having managed to produce biodiesel from the used oil
.........Read full story


Greener is Happier
10/18/2015

Do human beings find more passion and meaning in working for the greater good—in realizing their jobs contribute more than just profit? The answer is yes
.........Read full story


eLegs Give Paraplegics Hope
10/18/2014

Berkeley Bionics unveiled eLEGS, a wearable, artificially intelligent, bionic device that powers paraplegics up to get them standing and walking
.........Read full story


China's Fastest Supercomputer Unveiled
10/15/2015

China's fastest supercomputer "Tianhe-1," is about to be equipped with Chinese-made central processing unit chips, meaning that China could rival the world's most powerful computers
.........Read full story


Watermelon Lowers Blood Pressure
10/15/2014

Evidence from a pilot study suggests that watermelon can be an effective natural weapon against prehypertension, a precursor to cardiovascular disease
.........Read full story


`SpectroPen' Can Detect Tumor Edges
10/15/2010

Biomedical engineers are developing a hand-held device called a SpectroPen that could help surgeons see the edges of tumors in human patients in real time during surgery
.........Read full story


Device Measures Mars’ Atmosphere
10/15/2010

Instruments designed by a UT Dallas professor to measure atmospheric components on the surface of Mars have uncovered important clues about the planet’s atmosphere and climate history
.........Read full story


Vibrational Spectroscopy Gets Faster
10/15/2010

A paper by researchers at NIST may breathe new life into the use of a powerful—but tricky—diagnostic technique for cell biology
.........Read full story


 
 
Latest Headlines
Medtronic gets OK to study heart valve in US
Ratings agencies maintain views on St. Jude
St. Jude agrees to buy AGA Medical for $1.04B
Solta Medical acquires acne laser maker CLRS
Health insurers help GOP after dalliance with Dems
Insulet Corporation to Report Third Quarter 2010 Financial Results on Tuesday,
Summary Box: GE to buy diagnostics firm Clarient
Read More
 
Operators: Sources of Error
Operators: Sources of Error
10/23/2010

 Continual training is essential to minimize operator-induced errors in pipetting.

by Wendy Vaccaro, M.T. (ASCP), Technical Services Manager, ARTEL 

For quality assurance in the lab, all critical tasks must be standardized. However, liquid handling quality assurance programs commonly focus on pipette calibration, repair and maintenance but rarely include protocols for verifying operator technique. Yet just as malfunctioning pipettes and automated liquid handlers can result in inaccurate delivery volumes and alter laboratory results, so too can poor pipetting skills. 

The urgent need for operator training is discussed in a recently distributed letter from the Centers for Medicare and Medicaid Services (CMMS), which cites “poor pipetting technique” as one of the causes of “questionable test results” generated with an HIV test kit. After the erroneous results were reported, a root cause analysis determined that the operator incorrectly used the pipetting system during the test protocol, which required the addition of a micro specimen of sample. Following this incident, the Center’s Department of Health and Human Services formally recommended that labs institute staff training, competency assessments and the evaluation of quality assurance protocols to prevent similar error. 

Like baseball players being coached on swinging a bat and new drivers taking lessons before being able to operate a car legally, lab technicians must be trained on proper pipetting skills. Technique must be standardized within and across labs to minimize error and facilitate data comparability. Otherwise data integrity may be at risk. 

The following discusses common pipetting technique errors, their impact on pipetting accuracy and precision, and how effective training programs can minimize the risk of error. 

Operator technique and errors 

Researchers pipette on a daily basis, but many have never received formal training on pipetting. And like most repetitive, common tasks, pipetting is often taken for granted. 

Understanding the steps researchers can take to improve pipetting skills is important. First, however, it is helpful to evaluate common pipetting errors that can contribute to volume variation, all of which can be avoided with proper training.

Common pipetting errors include: 

• Failure to pre-wet the pipette tip: If pipette operators do not pre-wet the pipette tip prior to initial delivery, sample volume can be lost due to evaporation within the tip. Aspirating and expelling sample liquid at least three times before delivery can mitigate this risk, and is especially important when handling volatile solutions such as organic solvents. 
• Disregarding temperature: Sample volume can be altered if the pipette and the liquid being dispensed are not temperature equilibrated. This is because air displacement pipettes are affected by air pressure, relative humidity and vapor pressure of the liquid—all of which are temperature-dependent. Human body heat can also be transferred from the user to the pipette if handled too long, also causing volume variation. 
• Tip wiping: Unnecessary tip wiping can lead to sample loss, especially if wiping with absorbent materials, which can carry sample from the pipette tip. 
• Choosing the wrong pipetting mode: The choice of reverse or forward mode during pipetting is often arbitrary or based on operator preference. Yet reverse mode should only be used for viscous samples. During reverse mode, the plunger is depressed completely (past the first stop) to aspirate the sample and then depressed only to the first stop to deliver it. Therefore, using reverse mode with aqueous solutions leads to over-delivery while using forward mode with viscous solutions results in under-delivery. 
• Working too quickly: After aspirating, failure to pause with the pipette tip in the liquid can lead to under-delivery. This is because the liquid is not still at first insertion and requires about one second to settle. 

Artel offers pipette training courses.
Pipetting technique training programs are essential to minimize the risk of liquid handling inaccuracy and enhance data integrity.

• Pipetting at an angle: Touching the pipette tip to the container sides during aspiration results in loss of sample. In addition, removing the pipette at an angle can cause volume variation due to surface tension effects, especially when pipetting small volumes. Pulling the pipette straight out of the container can minimize error. 
• Using the wrong pipette tips: Failure to choose the proper tips for a given type of pipette can lead to an inadequate seal between the pipette and tip, causing leakage and sample loss. 

Need for training 

The need to include pipetting technique training in laboratory quality assurance programs is growing due to several trends in today’s life sciences industry. First, labs across markets are working with smaller liquid volumes and more complex multipart tests, including serial dilution protocols and polymerase chain reaction (PCR) assays where inaccuracies of just one microliter can be detrimental. Because microliter quantities are more sensitive to volume variation, operator variability can significantly alter research results. 

Another trend, as noted in the CMMS letter, is a shortage of trained lab professionals and a corresponding increased focus by regulatory bodies on ensuring operator competency. International standards such as ISO 17025, “general requirements for the competence of testing and calibration labs,” and ISO 15189, “medical labs—particularly requirements for quality and competence,” place a strong and appropriate emphasis on assessing operator competency. 

Pipetting solutions 

By providing technicians with proper training from expert professionals in liquid handling, labs can minimize the risk of volume variability caused by operators. To reduce the risk of lab error, however, a comprehensive and standardized method of pipetting technique training is essential. 

The first step in improving operator technique is educating users about the pipette itself. Topics should include the mechanical function of modern pipettes, which work through air displacement, and the variables that can affect accuracy and precision. This portion of the training should also include an overview of the various types and brands of pipettes and when best to use each, as well as how to select the proper tips. Reviewing existing regulations and quality standards is also important to ensure compliance and illustrate how technique can alter data. 

After providing a foundation of knowledge about pipettes, demonstrating proper technique and hands-on coaching follow. This stage of the training is most effective when coupled with measurement technologies that can provide immediate feedback. Operators can instantly verify how various physical actions alter final volume and change their technique accordingly. 

Like any training, the ability to measure learning and proficiency is essential. With pipetting technique programs, pre- and post-training skills assessment are necessary to gauge improvement in pipetting accuracy and precision. 

Standardized measurement tools that document the effectiveness of a training program coupled with standardized training can be used to facilitate certification. This certification can provide laboratory managers with objective evidence and documentation to support the pipetting competency and consistency of their technicians. This will prove useful as regulations continue to advance. 

Training only pipette operators, however, is not enough. It is important for researchers at all levels, whether they are on-the-bench scientists and technicians or lab managers. Process-control-focused training can be beneficial for quality and lab managers and supervisors. This level of training can include information about pipette repair and maintenance, detailed information about relevant regulations and quality standards, and calibration technologies. Best practices for development and implementation of liquid handling quality assurance programs must also be addressed. 

Lastly, pipetting technique training should not be a one-time event. Annual or semiannual training is optimal to ensure operators pipette consistently on an ongoing basis.

Evidence proves that operators contribute to lab errors through inconsistent pipetting techniques. For this reason, instrumentation is not the only thing that needs frequent calibration or checks. Lab technicians also need ongoing training. To minimize risk of liquid handling inaccuracy and enhance data integrity, pipetting technique training programs are essential.

 

For more information, contact ARTEL, www.artel-usa.com, 207-854-0860

 
 
 
 
 
 
Copyright © 2010 Labomatic All rights reserved.
Designed By : SAUDI SOFTECH